Smart-UPS On-Line SRC2000UXI

APC Smart-UPS RC 2000VA 230V No Batteries


APC Smart-UPS On-Line, 1400 Watts / 2000 VA, Input 230V / Output 230V , Interface Port DB-9 RS-232, SmartSlot , Extended runtime model , Rack Height 4 U

Includes: CD with software, Smart UPS signalling RS-232 cable, User Manual

Standard Lead Time: Usually in Stock

For Best Price & Service : Call scrolling numbers or Contact Us


SRC2000UXI Features & Benefits


  Automatic internal bypass   Supplies utility power to the connected loads in the event of a UPS overload condition or fault.
  Scalable runtime   Allows additional run time to be quickly added as needed.
  Intelligent battery management   Maximizes battery performance, life, and reliability through intelligent, precision charging.
  Hot-swappable batteries   Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
  Automatic restart of loads after UPS shutdown   Automatically starts up the connected equipment upon the return of utility power.
  Temperature-compensated battery charging   Prolongs battery life by regulating the charge voltage according to battery temperature.


  Network manageable   Provides remote management of the UPS over the network.
  InfraStruXure Manager Compatible   Enables centralized management via the APC InfraStruXure Manager.
  SmartSlot   Customize UPS capabilities with management cards.
  LED status indicators   Quickly understand unit and power status with visual indicators.
  Serial Connectivity   Provides management of the UPS via a serial port.


  Plug-and-Play external batteries   Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
  Rack/Tower convertible   Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
  Flash upgradeable firmware   Install maintenance releases of firmware remotely using FTP.


  User-replaceable batteries   Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
  Automatic self-test   Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  Predictive failure notification   Provides early-warning fault analysis ensuring proactive component replacement.
  Disconnected battery notification   Warns when a battery is not available to provide backup power.
  Audible alarms   Provides notification of changing utility power and UPS conditions


  Frequency and voltage regulation   Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
  Power conditioning   Protects connected loads from surges, spikes, lightning, and other power disturbances.  
  Input power factor correction    Minimizes installation costs by enabling the use of smaller generators and cabling.  
  Generator compatible    Ensures clean, uninterrupted power to protected equipment when generator power is used.  
  Cold-start capable    Provides temporary battery power when the utility power is out.  
  Resettable circuit breaker    Easy recovery from overloads; no need to replace a fuse.  
  Safety-agency approved    Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.  

Technical Specifications


  Output Power Capacity   1400 Watts / 2000 VA
  Max Configurable Power   1400 Watts / 2000 VA
  Nominal Output Voltage
  Output Voltage Note   Configurable for 220 : 230 or 240 nominal output voltage
  Efficiency at Full Load   88.0%
  Output Voltage Distortion   Less than 2%
  Output Frequency (sync to mains)   50/60Hz +/- 3 Hz
  Other Output Voltages   220,240
  Crest Factor    3 : 1  
  Topology    Double Conversion Online  
  Waveform Type    Sine wave  
  Output Connections  
(1) Hard Wire 3-wire (H N + G)
(8) IEC 320 C13
IEC 320 C13
  Bypass    Built-in Bypass  


  Nominal Input Voltage   230V
  Input Frequency
  50/60 Hz +/- 5 Hz (auto sensing)
  Input Connections
  Hard Wire 3 wire (1PH+N+G)
  Cord Length    2.44 meters  
  Input voltage range for main operations   160 - 280V
  Input voltage adjustable range for mains operation   100 - 280V
  Other Input Voltages    220,240  

Batteries & Runtime

  Battery Type   No internal battery - uses external battery system
  Replacement battery cartridge note   Unit ships without battery

Communications & Management

  Interface Port(s)   DB-9 RS-232,SmartSlot
  Available SmartSlot™ Interface Quantity    1
  Control panel   LED status display with load and battery bar-graphs and On Line : On Battery : Replace Battery : Overload and Bypass Indicators
  Audible Alarm   Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
  Emergency Power Off (EPO)   Yes


Surge Protection and Filtering

  Surge energy rating   420 Joules
  Filtering   Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449
  Data Line Protection    RJ-45 Modem/Fax protection (four wire dual line)  



  Maximum Height   174.00 mm
  Maximum Width   432.00 mm
  Maximum Depth   457.00 mm
  Rack Height    4U
  Net Weight   14.60KG
  Shipping Weight   18.30KG
  Shipping Height   377.00 mm
  Shipping Width   622.00 mm
  Shipping Depth   597.00 mm
  Color   Black
  Units per Pallet   12.00



  Operating Environment   0 - 40 °C
  Operating Relative Humidity   0 - 95%
  Operating Elevation   0-3000 meters
  Storage Temperature   -20 - 50 °C
  Storage Relative Humidity   0 - 95%
  Storage Elevation   0-15000 meters
  Audible noise at 1 meter from surface of unit   50.00 dBA
  Online Thermal Dissipation   652.00 BTU/hr



  Regulatory Approvals    EN 60950,EN/IEC 62040-2
  Standard Warranty   2 years repair or replace,optional on-site warranties available,optional extended warranties available
  Environmental Compliance    RoHS 7b Exemption,China RoHS,REACH: Contains No SVHCs